Portable DC Charger for Lab Tester/Simulator/Analyzer Standard CCS CCS2 CCS1 Chademo Gbt

• After-sales Service: 24 Hours
• Warranty: 12 Months
• Transport Package: Wooden Case
• Trademark: Saiter
• Origin: China
• Model NO.: ST-9980EU-HPC
• Production Capacity: 100PCS/Month

Product Description

Portable DC charger tester for lab
ST-9980EU-HPC




Product Overview
Saiter Product ST-9980EU-HPC is A dedicated for electric vehicle conduction charger third-party field(lab) verification testing device, based on the national standard protocol IEC61851-1.2017, IEC61851-23.2014, ISO15118-1.2013, ISO15118-2.2014, ISO15118-3.2015, DIN70121 2014 development, tester can avoid using electric vehicle testing device test is not convenient, test content is not comprehensive, frequent charging lead to battery life shortening, at the same time. To avoid any damage to the test vehicle due to a charging failure. The device can meet an application test scenario with short time 800A current load and long time 650A current load.

Mainly used in electric vehicles the vehicle-mounted conductive charger product testing and pile metrological verification of charging pile (verification for matching), suitable for the car charger manufacturer research and development, can be widely used in charging facilities manufacturers of electric car on-board conductive charger, the early research and development debugging, metrological verification, factory test.


1.Product Features
 

	Portable tie rod box design, small size, light weight, convenient to carry out, and high electrical protection level; Equipped with 1 DC charging vehicle socket for CCS2 electric vehicle conduction charging (DC1000V500A)		Built-in HomePlugGreenPHY data monitoring module, support provides HomePlugGreenPHY data package collection / storage, support users to charge the underlying data analysis; (apolegamy)
	Strictly implement ISO 15118 and DIN SPEC70121 charging communication protocol standards to meet the standard charging timing test requirements; 10-inch touch screen interface, real-time monitoring and display of charging voltage, charging current, CP status and other information of charging pile		Support the display and setting of EVCC parameter setting, EVSE parameter display and other kinds of charging parameters; Support charging voltage, current, power, state display, charging timing chart display and charging waveform chart display; (optional) The tester has built-in wireless WiFi function, and the upper computer can conduct remote wireless test by connecting the device with WiFi; (optional)
	The equipment is equipped with the upper computer software, which can connect the upper computer software to set the charging parameters and the charging status display, and the software can output the current charging message data in real time; The equipment has a built-in battery voltage analog device (DC0-1100V), which can simulate the battery voltage to test the battery compatibility of the charging pile		Multi-channel high-precision high-speed waveform acquisition module can collect charging voltage, current, guide signal, etc., to meet the requirements of equipment mutual operation test; (optional) Vehicle control guide circuit simulation function, truly simulate the vehicle charging process, with special calibration terminal on the equipment panel, can use various methods to verify the charging signal

Reference standards

IEC61851-1.2017	Electric vehicle conductive charging system-Part 1: General requirements
IEC61851-23.2014	Electric vehicle conductive charging system-Part 23:DC electric vehicle supply equipment
ISO15118-1.2013	Road vehicles -Vehicle to grid communication interface-Part 1:General information and use-case definition
ISO15118-2.2014	Road vehides-Vehicle-to-Grid Communication Interface - Part 2: Network and application protocol requirements
ISO15118-3.2015	Road vehicles-Vehicle to grid communication interface-Part 3: Physical and data linklayer requirements
DIN70121 2014	International standard norme intemationanle Part 22: AC electric vehicle charging station

Program Interface



Saiter Tech was established in 2015 in Shenzhen China, specialized in developing test systems for E-vehicles and EV chargers. 
With a clear customer-centric approach, we aim to ensure your EV and EV chargers conformity, safety and reliability. Based on more than 5 years development, we have created mini, portable and integrated test systems - complying with GB/T, CCS(IEC/ISO/DIN/SAE) and CHAdeMO standards.
 
Whether mobile, laboratory racks in test E-vehicles or EV chargers, we can fulfil your demands.
Thanks to the innovative Saiter system, we can always find a solution which is precisely matching your needs.